Outdoor environment detection processes – Part 1

For the implementation of modern assistance functions as well as the (partial) autonomy of utility vehicles, the vehicle – depending on intended application – must be in a position to localize itself in its environment, recognize obstacles in the planned driving route, and respond adequately to these. This can be achieved, for example, by stopping in front of the obstacle or circumventing it. In order to detect structures such as obstacles in the immediate environment, mobile machines must therefore have some degree of ability to “perceive” the immediate environment.

By now, there are various sensor systems, each based on different measuring principles, that compete with one another in so-called environment detection. There is no general answer as to which method is the best option, or whether a combination of different sensor systems (sensor fusion) makes sense. Depending on the type of application, what exactly the sensor should recognize has to be determined. Other important considerations include in what resolution the information should be available, in what type of environment the application takes place, or how expensive the sensor should be. These are just a few of the questions you have to ask yourself when selecting the best environment sensor technology for your application. So that you can get an overview of the most common processes in environment detection, we want to present them here briefly. In the first part of this article, we will look at the process of time-of-flight as well as radar technology.

Environment detection using infrared light: the time-of-flight camera

One means of environment detection consists of measuring distance using a time-of-flight camera (TOF camera). This type of camera uses a so-called photonic mixing device (PMD sensor) as an image sensor. This sensor operates on the time-of-flight principle for which the camera is named.

With this process, an infrared light signal is emitted that, in turn, is received by a sensor. Based on the runtime of the light and the known, constant speed of light, the distance of the object to the PMD sensor can be determined. The closer the object is to the PMD sensor, the shorter the measured light runtime. The further the object is away, the longer the runtime of the infrared rays.

Through the technology of the TOF camera, it is possible to measure this light runtime in pixels and thereby create a three-dimensional representation of the current scene. This data capture is so fast that even real-time requirements can be achieved with it.

TOF cameras are already being tested and applied in driver assistance systems or safety sensors in the automotive industry (pedestrian recognition, emergency brake assistance, etc.). The mobile robotics sector also uses this technology frequently, for example, to recognize obstacles or to follow individuals.

A TOF camera mounted on a tracked vehicle on a test drive to evaluate assistance systems and automation in wine growing

Old technology in new applications: radar

Radar stands for “Radio Detection and Ranging” and describes various localization and recognition processes that use electromagnetic waves. Here, we are thus dealing with a non-visual process for measuring distance. The origins of radar date to 1886 when Heinrich Hertz discovered that metal objects reflect radio waves. Christian Hülsmeyer subsequently worked on the subject of localization using these waves. In 1904, he applied for a patent for the first precursor to today’s radar systems, the telemobiloscope.

A radar device sends out bundled electromagnetic waves that an object within sight distance then reflects. These reflected radio waves are received back by the radar device and subsequently evaluated. In this manner, conclusions about the distance to an object, its direction and relative motion and, when considering consecutive measurements, even the speed of an object can be drawn.

A long-range radar of the type often used in automotive assistance systems

With radar devices used for environment detection, the frequency modulated continuous wave (FMCW) radar is generally employed. In contrast to impulse radar devices, this type of radar sends out a continuous signal, but constantly changes the transmission frequency. Most people are familiar with this process through “speed traps” set up by the police used extensively in law enforcement. In addition to measuring speed, such a radar also measures the distance of the speeding vehicle to the camera and triggers it just at the right moment.

Other applications for radar sensors include motion and (filling) level sensors, or use in adaptive cruise control systems for cars. In these, they detect the speed of and distance to the car driving ahead. Based on this information, the speed of your car can be modified, or emergency braking initiated.

Please also read the other articles of article series concering environment detection:
Part 2
Part 3

"Autonomer Mobilebagger" (AMoBA)

SSI – Synchronous Serial Interface

The Synchronous-Serial-Interface (SSI) is a digital interface which is mostly used in length and angle measuring systems. It is especially suitable for applications where reliability and signal robustness is very important. The Max Stegmann GmbH, which is now a part of the company group SICK, was the developer of the SSI. Meanwhile, SSI is also used by other manufacturers. Unlike a parallel interface, where the bits are transmitted in various lines, transmission here is serial – which means successively.

Continue reading

SCADA – the modern monitoring system

By virtue of the increasing amount of automated systems, the importance of monitoring and controlling these complex systems rises, too. Obviously, the automated systems should be operated with minimum staff deployment. Therefore, it is necessary to offer tools to the operators for controlling the processes. “SCADA” is typically mentioned in this context, which integrates computer systems for exactly these monitoring- and controlling- tasks and relieves the operators. The definition of SCADA is given below, explaining, where it is used, and how it works.

Steueraufgaben schnell realisieren mit der Generic Control Box

Continue reading

Wassererkennung mit dem Aqua Visor

Concept Study AquaVisor

Development of a special camera system for the detection of water surfaces in the context of autonomous navigation of mobile robots. In this project, a demonstrator with embedded electronics and integrated image preprocessing was realized.

On behalf of the German Army the demonstrator was evaluated in the context of the study “Water Detection” by the Robotics Research Lab at the University of Kaiserslautern.

Detection of water surfaces with the Aqua Visor

The Aqua Visor is used for the detection of water surfaces

Der Claw Cleaner Eco der Firma MK Nutztierhygiene

Control technology for Animal Care

Health is a central topic in animal farming, as product quality is directly linked to the well-being of the animals. Prophylactic measures can conveniently be achieved on any farm with animal care solutions by MK Nutztierhygiene. The latest generation of systems is driven by Robot Makers’ innovative technology. Precise sensing and intelligent control allows for an even more selective application to save disinfectants and water.

The ongoing development is presented at Euro Tier 2012 in Hannover by our partner company MK Nutztierhygiene.

Der Claw Cleaner Eco der Firma MKS Nutztierhygiene